INPAC Fuel Products Catalogue8-page product catalogue
Download PDF
INPAC branded thermal conversion reactor at the Bali facility

INPAC / FUEL PRODUCTS CATALOGUE / 2026

Four fuels.
Ready to supply.

Waste-derived fuels produced in Bali, Indonesia.

Sections

  • 01Product range
  • 02Crude Biofuel
  • 03IFO — including laboratory testing
  • 04Diesel EN590
  • 05RDF
  • 06Notes & contact
01Crude BiofuelWaste-derived liquid fuel
02IFOIntermediate fuel oil
03Diesel EN590Produced diesel, awaiting test release
04RDF BalesRefuse-derived fuel bales
1 / 8
INPACPRODUCT 01 / CRUDE BIOFUEL

WASTE-DERIVED LIQUID FUEL

Crude
Biofuel

Energy-rich liquid recovered from the thermal conversion of prepared waste feedstock.

Row of INPAC thermal conversion units at the Bali facility
PRICENegotiable upon requestExcluding taxes & transport
AVAILABILITYUp to 150,000 litres / monthSubject to confirmation

Potential applications

Industrial heatCompatible boilers, furnaces and stationary thermal systems.

Refinery feedstockCo-processing or upgrading feedstock.

Further refinementDistillation or treatment into tighter specifications.

Suitability and blend ratio to be confirmed by the buyer against a current batch analysis.

2 / 8
INPACPRODUCT 02 / IFO

DISTILLED PYROLYSIS OIL

IFO
Intermediate Fuel Oil

AVAILABLE
NOW
PRICENegotiable upon requestExcluding taxes & transport
AVAILABILITY48,000 litres / monthSubject to confirmation

Potential applications

Industrial boilersHeat and steam systems accepting liquid industrial fuel.

Marine & stationary powerResidual-fuel engines and gensets, subject to OEM approval.

Blending & upgradingIntermediate stream for fuel treatment or blending.

INPAC production hall in Bali where intermediate fuel oil is distilled

Laboratory test results for this product are on the following page.

3 / 8
INPACPRODUCT 02 / IFO — LABORATORY TESTING

Laboratory test results

LEMIGAS report 202601947/LHU/DPMP.1/IX/2026 — sample 2026017173 (759-26)
Download full test report (PDF)
PropertyResultUnitMethod
Cetane number27.0—ASTM D613-26
Density at 15°C811.0kg/m³ASTM D4052-22
Kinematic viscosity at 40°C0.957cStASTM D445-24
Sulfur content0.1246% wtASTM D4294-24
Distillation, 90% vol. recovered428.5°CASTM D1160-18
Flash pointBelow 0°CIP 170-14
Pour pointBelow −36°CASTM D97-17b (2022)
Carbon residue0.569% wtASTM D189-24
Water (Karl Fischer)630ppm wtASTM D6304-24, Proc. A
Copper strip corrosion1b—ASTM D130-19
Ash content0.006% wtASTM D482-25
Sediment0.02% w/wASTM D473-22
Strong acid numberNilmg KOH/gASTM D664A-24
Total acid number0.45mg KOH/gASTM D664A-24
Visual appearanceClear & bright—Visual
ASTM colour> 8.0ASTM No.ASTM D1500-24
Lubricity, HFRR at 60°C290micronASTM D6079-22
Oxidation stability7.07minutesASTM D7545-14 (2019) e1

Results apply only to sample 2026017173 (759-26) and do not establish ISO 8217 grade compliance.

4 / 8
INPACPRODUCT 03 / DIESEL EN590
TESTING IN PROGRESS

PRODUCED AND AVAILABLE — PENDING TEST RELEASE

Diesel
EN590

This product is available, but until laboratory testing is complete we are not authorised to sell it.

MAXIMUM CAPACITY48,000litres / month
INPAC-produced fuel burning during a site demonstration
PRICENegotiable upon requestExcluding taxes & transport
AVAILABILITYOn test releaseSubject to confirmation

Applications on release

Road transportVehicles approved for EN 590 diesel.

GeneratorsStandby and prime-power generator sets.

Industrial machineryConstruction, agricultural and non-road equipment.

Release condition

Testing is under way. Sales will only open once results authorise release.

5 / 8
INPACPRODUCT 04 / RDF

SORTED PLASTICS, BALED FOR SUPPLY

RDF
Refuse-Derived Fuel

Sorted plastic residues compacted into transport-ready bales.

Bales of refuse-derived fuel wrapped and stacked for transport
PRICENegotiable upon requestExcluding taxes & transport
AVAILABILITY600 tonnes / monthSubject to confirmation

Potential applications

Cement co-processingAlternative fuel for qualified cement kilns.

Industrial energyFeedstock for permitted facilities using refuse-derived fuel.

Further conversionInput for waste-to-fuel or waste-to-chemicals processes.

Calorific value, chlorine and moisture are feedstock-dependent. Buyer testing applies.

6 / 8
INPACNOTES / SOURCES

TECHNICAL REFERENCES

Clear claims.
Qualified use.

Application examples describe established industry uses, not approval for any particular engine, boiler or facility.

01

IEA Bioenergy Task 34Pyrolysis bio-oil applications.

02

ASTM D7544-23Pyrolysis liquid biofuel specification.

03

S&P Global Commodity InsightsBunker fuel specifications.

04

CEN EN 590:2025 / DieselNetAutomotive diesel requirements.

05

Cleaner Waste Systems (2022)SRF in the cement industry.

06

LEMIGASTest Report 202601947/LHU/DPMP.1/IX/2026.

Commercial note

All prices are negotiable upon request and subject to written confirmation.

7 / 8
INPACCONTACT / INPAC SOLUTION INDO

START A CONVERSATION

Contact

For applications, samples, pricing confirmation and supply planning.

FOR THE PEOPLE,
BY THE PEOPLE.
EMAILinfo@inpac.solutions
WEBSITEinpac.solutions
REGISTERED ADDRESS

Pertokoan Imam Bonjol Square, Jalan Imam Bonjol No. 555, Blok A 34, Kec. Denpasar, Bali 80119, Indonesia

WHEN CONTACTING US
  • Intended application
  • Required monthly volume
  • Preferred delivery location
Send an enquiry
The INPAC team at the Bali facility

FOR THE PEOPLE,
BY THE PEOPLE.